The product images shown are Illustrative only and may not be an exact representation of the product.
View All 4219BF Barricade™ GreenShield Fuel Hose

5/16XRL FUEL LINE 225 BARRICADE

Product # 42195652

The 4219BF Barricade® Fuel Injection Hose is a low-permeation hose offering broad fuel compatibility including gasoline, ethanol blends, 100% methanol (no blends), diesel, biodiesel (including all blends of SME, RME or PME). It utilizes patented GreenShield® Barrier Technology to provide enhanced environmental protection and better fuel efficiency. It is compatible with any fuel injected application - cars, light trucks, UTVs, and small engines (1985 and newer) - where a barrier fuel hose is required. Not for in-tank or gaseous fuels.

  • HNBR tube with thermoplastic barrier and CPE cover; reinforced aramid fiber.
  • High temperature range tolerance: -40°F to +257°F (-40°C to +125°C).
  • Specially formulated fiber reinforced undercord that improves belt stability.
  • Product Details
    Part # 5/16XRL4219BFBARRICADEHP/
    Product # 42195652
    Description 5/16XRL FUEL LINE 225 BARRICADE
    UPC 770075445661
    Vacuum (In. Hg) 24
    Minimum Bend Radius (in) 2.95
    Continuous Operating Temperature Range -40°F to +275°F, -40°F to +302°F
    Hose Inside Diameter (in) 0.3125
    Hose Inside Diameter (mm) 7.9
    Hose Outside Diameter (in) 0.56
    Hose Outside Diameter (mm) 14.2
    Temperature Range -40°F to +275°F (-40°C to +135°C) continuous service (including Bio-Diesel) -40°F to +302°F (-40°C to +150°C) intermittent service (excluding Bio-Diesel).
  • Construction
    Construction: Cover Type C (Nitrile). Synthetic rubber.
    Construction: Design Factor 5:1
    Construction: Reinforcement Spiral textile.
    Construction: Tube Type J (CPE). Fuel resistant, synthetic rubber, black, with thermoplastic barrier.
    Color Black
  • International Standards
    Meets These Agency Specifications SAE - Society of Automotive Engineers
    Standards CARB small engine off-road (CARB certificate Q-09-019). Exceeds SAE J30R14T2+ (except kink) with SAE J30R12 burst. Meets Gates GTS-05-067 high-pressure fuel line specification and Caterpillar CAT 1E4340 (Type A and B) diesel and Bio-Diesel specification.
    Standard Industry Specification SAE J30R12, SAE J30R14
  • Notes
    Couplings Note Select Ind Hose Coupling Reference Sheet link below for additional information.
    Recommended For Any fuel injected engine application (1985 and newer) in cars, light trucks, off-road vehicles and small engines where a barrier fuel hose is required. Gasoline, Gasoline/Ethanol (E10, E15, E85), 100% Methanol only (Methanol blends not recommended). Diesel, Diesel/Bio-Diesel blends, 100% Bio-Diesel (SME, RME, and PME Bio-Diesels are acceptable).
  • Packaging details
    Customer Pack 550
    Weight (lbs.) 0.109

PATENTED GREENSHIELD® TECHNOLOGY

Our five-layer Greenshield® Barrier Technology cuts vapor loss and saves fuel, making it safe for the environment and fuel efficient.

  1. Barrier tube - provides high heat and corrosive liquid resistance.
  2. Greenshield® barrier - patent-pending technology provides the lowest permeation in the industry.
  3. Adhesion layer - secondary protective barrier.
  4. Reinforcement layer - spiral textile reinforcement provide strength and pressure resistance.
  5. Cover - protect underlying components.

Features and Benefits

  • Static conductive (ISO 1813) and can as such be used in the conditions described in the Directive 2014/34/EU- ATEX (except PK profile).
  • Belts will operate in standard pulleys provided the pulleys are manufactured to the DIN 7867 or ISO 9982 standard for the specific cross-section.
  • Standard: SAE 30R14 T2 except no kink test and higher burst, CARB, EPA Non-Road Fuel Lines (<15g/m²/day) for spark ignition engines.
  • All elastomeric rubber compound provides oil and heat resistance.
  • Can be installed on grooved DriveR and flat DriveN pulley.
  • Oil, heat, ozone, and abrasion-resistant cover.
  • Long life due to extra load-carrying capacity.
  • Not for in-tank or gaseous fuels.
  • Improved performance on back idlers.
  • Extremely smooth and cool running.
  • Very high power capacity per rib.
  • Tolerant of pulley groove debris.
  • Max working pressure: 225 psi.
  • Working pressure: 1,55 MPa.
  • Multi-fuel compatibility.
  • Barrier: Thermoplastic liner.
  • Design factor: 5:1.
  • Size: 3/16" - 1/2".

MULTI-FUEL COMPATIBLE

Barricade® Fuel Injection Hose provides a versatile solution in OE-quality aftermarket fuel hose. The Barricade® Fuel Injection Hose is approved for use with: unleaded gasoline, diesel, biodiesel (up to B100 [SME, PME, RME], max temp +100°C; +212°F), methanol, ethanol (E10, E15, E85), and gasohol fuels.